KAIET - Krishna All India Entrance Test


KAIET 2015 – Krishna All India Entrance Exam acronym as KAIET is conducted by Krishna Institute of Medical Sciences –a Deemed University- Karad for admission to:
  • MBBS
  • BDS
  • BPTh and
  • B.Sc. Nursing courses

 

KAIET Exam Eligibility

Educational Qualification:

Eligibility criteria of qualifying Examination for various courses

For M.B.B.S. and BDS:

A candidate to open category must have passed in the subject of Physics, Chemistry, Biology & English individually and must have obtained a minimum of 50% marks, taken together in physics, Chemistry and Biology at the qualifying examination. In respect of candidates belonging to SC/ST/OBC the marks obtained in Physics, Chemistry and Biology taken together in qualifying examination be 40%.

For B.Sc (Nursing):

A candidate belonging to open category must have obtained not less than 50 % marks in Physics, Chemistry, Biology and English taken together at HSC (or equivalent) examination. A candidate belonging to backward class must have obtained not less than 40 % marks in Physics, Chemistry, Biology and English taken together at HSC (or equivalent) exam.

For B.PTh:

The candidates should have only Passing grade at HSC / 12th standard or equivalent Examination.

Note: The candidates who are appearing for qualifying examination i.e. HSC (or equivalent exam.) in February / March 2013 are eligible to appear for KAIET 2014, however, they must fulfil the eligibility condition at the time of admission.

Important: The above eligibility criteria is also applicable to NRI and Foreign Nationals, however they shall submit equivalence certificate obtained from appropriate Authorities.

Age Limits:

The candidate must have attained the age of 17 years.

 

KAIET Exam Pattern

The KAIET consists of 1 common question paper in the subjects of Physics, Chemistry and Biology(Botany & Zoology) consisting of Multiple choice questions (MCQs) as given below:

Subject No of Questions Time Allowed
Physics 50 3 Hrs
Chemistry 50
Biology 100
Total 200

There will be no choice among the questions. The candidate is expected to attempt all the 200 questions. Out of four circles provided for selection of answers against a question, the candidate should fill up one circle only. Each correct answer will be given one mark. There shall be no negative marking for wrong answers. Scratching, overwriting, tick marks & multiple answers will be considered as wrong answers and no marks will be awarded to them. The medium of examination shall be English only.

 

How to apply for the KAIET?

The candidates get Online Application Form available on the official website www.kimsuniversity.in and can be submitted within the stipulated time as per the following instructions:

Relevant and complete information and data entry is to be made in the online application format by the candidate to download the application form.

Hard copy of the downloaded application form along with the Demand Draft of Rs 1,500/- in favor of Krishna Institute of Medical Sciences University, payable at Karad should be submitted within the  stipulated time to:

 

The competent Authority
Krishna Institue of Medical Sciences University
Near Dhebewadi Road
Tal:karad 415110
Dist: Satara
Maharashtra State.

The downloaded application form must have the recent color photograph of the candidate, signature of the candidate, left thumb impression, signature of candidate's parent/guardian Incomplete forms will not be accepted.

Online submitted forms will be accepted only after receiving the hard copy of the application form and the Demand Draft of Rs.1,500. Candidates who have applied online will know the status of application by student login.

2. Application form will also be available at the Krishna Institute of Medical Sciences University office, Karad, (9.00 am to 5.00 pm) on payment of Rs.500 and by post with an additional payment of Rs.100, by DD in favor of Krishna Institute of Medical Sciences University, payable at Karad. The filled form should reach the university on or before the scheduled data along with a DD of Rs.1000.


KAIET Exam Syllabus

KAIET Syllabus of Physics

Physical World and Measurement

  • Physics: Scope and excitement; nature of physical laws; Physics, technology and society.
  • Need for measurement: Units of measurement; systems of units; SI units, fundamental and derived units.
  • Length, mass and time measurements; accuracy and precision of measuring instruments; errors in measurement; significant figures.
  • Dimensions of physical quantities, dimensional analysis and its applications.

Kinematics

  • Frame of reference, Motion in a straight line; Position-time graph, speed and velocity. Uniform and non-uniform motion, average speed and instantaneous velocity. Uniformly accelerated motion, velocity-time and position-time graphs, for uniformly accelerated motion (graphical treatment).
  • Elementary concepts of differentiation and integration for describing motion. Scalar and vector quantities: Position and displacement vectors, general vectors, general vectors and notation, equality of vectors, multiplication of vectors by a real number; addition and subtraction of vectors. Relative velocity.
  • Unit vectors. Resolution of a vector in a plane-rectangular components.
  • Scalar and Vector products of Vectors. Motion in a plane. Cases of uniform velocity and uniform acceleration- projectile motion. Uniform circular motion.

Laws of Motion

  • Intuitive concept of force. Inertia, Newton's first law of motion; momentum and Newton's second law of motion; impulse; Newton's third law of motion. Law of conservation of linear momentum and its applications.
  • Equilibrium of concurrent forces. Static and Kinetic friction, laws of friction, rolling friction, lubrication.
  • Dynamics of uniform circular motion. Centripetal force, examples of circular motion (vehicle on level circular road, vehicle on banked road). Work, Energy and Power
  • Work done by a constant force and variable force; kinetic energy, work-energy theorem, power.
  • Notion of potential energy, potential energy of a spring, conservative forces; conservation of mechanical energy (kinetic and potential energies); non-conservative forces; motion in a vertical circle, elastic and inelastic collisions in one and two dimensions.Motion of System of Particles and Rigid Body.
  • Centre of mass of a two-particle system, momentum conservation and centre of mass motion. Centre of mass  of a rigid body; centre of mass of uniform rod.
  • Moment of a force,-torque, angular momentum, conservation of angular momentum with some examples.
  • Equilibrium of rigid bodies, rigid body rotation and equation of rotational motion, comparison of linear and rotational motions; moment of inertia, radius of gyration. Values of M.I. for simple geometrical objects (no derivation). Statement of parallel and perpendicular axes theorems and their applications.

Gravitation

  • Kepler's laws of planetary motion. The universal law of gravitation. Acceleration due to gravity and its variation with altitude and depth.
  • Gravitational potential energy; gravitational potential. Escape velocity, orbital velocity of a satellite. Geostationary satellites. UNITVII: Properties of Bulk Matter
  • Elastic behavior, Stress-strain relationship. Hooke's law, Young's modulus, bulk modulus, shear, modulus of rigidity, poisson's ratio; elastic energy.
  •  Viscosity, Stokes' law, terminal velocity, Reynold's number, streamline and turbulent flow. Critical velocity, Bernoulli's theorem and its applications.
  • Surface energy and surface tension, angle of contact, excess of pressure, application of surface tension ideas to drops, bubbles and capillary rise.
  • Heat, temperature, thermal expansion; thermal expansion of solids, liquids, and gases. Anomalous expansion. Specific heat capacity: Cp, Cv- calorimetry; change of state latent heat.
  • Heat transfer- conduction and thermal conductivity, convection and radiation. Qualitative ideas of Black Body Radiation, Wein's displacement law, and Green House effect.
  • Newton's law of cooling and Stefan's law.

Properties of Bulk Matter

  • Elastic behavior, Stress-strain relationship. Hooke's law, Young's modulus, bulk modulus, shear, modulus of rigidity, poisson's ratio; elastic energy.
  • Viscosity, Stokes' law, terminal velocity, Reynold's number, streamline and turbulent flow. Critical velocity, Bernoulli's theorem and its applications.
  • Surface energy and surface tension, angle of contact, excess of pressure, application of surface tension ideas to drops, bubbles and capillary rise. Final Syllabus for NEET-UG
  • Heat, temperature, thermal expansion; thermal expansion of solids, liquids, and gases. Anomalous expansion. Specific heat capacity: Cp, Cv- calorimetry; change of state latent heat.
  • Heat transfer- conduction and thermal conductivity, convection and radiation. Qualitative ideas of Black Body Radiation, Wein's displacement law, and GreenHouse effect.
  • Newton's law of cooling and Stefan's law

Thermodynamics

  • Thermal equilibrium and definition of temperature (zeroth law of Thermodynamics). Heat, work and internal energy. First law of thermodynamics. Isothermal and adiabatic processes.
  • Second law of the thermodynamics: Reversible and irreversible processes. Heat engines and refrigerators.

Behaviour of Perfect Gas and Kinetic Theory

  • Equation of state of a perfect gas, work done on compressing a gas.
  • Kinetic theory of gases: Assumptions, concept of pressure. Kinetic energy and temperature; degrees of  freedom, law of equipartition of energy (statement only) and application to specific heat capacities of gases;  concept of mean free path.

Oscillations and Waves

  • Periodic motion-period, frequency, displacement as a function of time. Periodic functions. Simple harmonic motion(SHM) and its equation; phase; oscillations of a spring-restoring force and force constant; energy in SHM  Kinetic and potential energies; simple pendulum-derivation of expression for its time period; free, forced and  damped oscillations (qualitative ideas only), resonance.
  • Wave motion. Longitudinal and transverse waves, speed of wave motion. Displacement relation for a progressive wave.
  • Principle of superposition of waves, reflection of waves, standing waves in strings and organ pipes, fundamental mode and harmonics. Beats. Doppler effect. Resonance, Sonometer, Melde’s experiment, Study of vibrations of air columns, Resonance tube.

Surface Tension

  • Surface tension on the baasis of molecular theory, Surface energy, Surface tension and surface energy, Effect of impurity and temperature on surface tension, Angle of contact, Shape of liquid drop, Capillary and capillary action.

Electrostatics

  • Electric charges and their conservation. Coulomb's law-force between two point charges, forces between multiple charges; superposition principle and continuous charge distribution.
  • Electric field, electric field due to a point charge, electric field lines; electric dipole, electric field due to a dipole; torque on a dipole in a uniform electric field.
  • Electric flux, statement of Gauss's theorem and its applications to find field due to infinitely long straight wire, uniformly charged infinite plane sheet and uniformly charged thin spherical shell (field inside and outside)
  • Electric potential, potential difference, electric potential due to a point charge, a dipole and system of charges: equipotential surfaces, electrical potential energy of a system of two point charges and of electric diploes in an electrostatic field.
  • Conductors and insulators, free charges and bound charges inside a conductor. Dielectrics and electric polarization, capacitors and capacitance, combination of capacitors in series and in parallel, capacitance of a parallel plate capacitor with and without dielectric medium between the plates, energy stored in a capacitor, Van de Graaff generator.

Current Electricity

  • Electric current, flow of electric charges in a metallic conductor, drift velocity and mobility, and their relation with electric current; Ohm's law, electrical resistance, V-I characteristics (liner and non-linear), electrical energy and power, electrical resistivity and conductivity.
  • Carbon resistors, colour code for carbon resistors; series and parallel combinations of resistors; temperature dependence of resistance.
  • Internal resistance of a cell, potential difference and emf of a cell, combination of cells in series and in parallel.
  • Kirchhoff's laws and simple applications. Wheatstone bridge, metre bridge.
  • Potentiometer-principle and applications to measure potential difference, and for comparing emf of two cells; measurement of internal resistance of a cell.

Magnetic Effects of Current and Magnetism

  • Concept of magnetic field, Oersted's experiment. Biot-Savart law and its application to current carrying circular loop.
  • Ampere's law and its applications to infinitely long straight wire, straight and toroidal solenoids. Force on a moving charge in uniform magnetic and electric fields. Cyclotron.
  • Force on a current-carrying conductor in a uniform magnetic field. Force between two parallel current-carrying conductorsdefinition of ampere. Torque experienced by a current loop in a magnetic field; moving coil galvanometer-its current sensitivity and conversion to ammeter and voltmeter.
  • Current loop as a magnetic dipole and its magnetic dipole moment. Magnetic dipole moment of a revolving  electron. Magnetic field intensity due to a magnetic dipole (bar magnet) along its axis and perpendicular to its axis. Torque on a magnetic dipole (bar magnet) in a uniform magnetic field; bar magnet as an equivalent solenoid, magnetic field lines; Earth's magnetic field and magnetic elements.
  • Para-, dia-and ferro-magnetic substances, with examples.
  • Electromagnetic and factors affecting their strengths. Permanent magnets.

Electromagnetic Induction and Alternating Currents

  • Electromagnetic induction; Faraday's law, induced emf and current; Lenz's Law, Eddy currents. Self and mutual inductance.
  • Alternating currents, peak and rms value of alternating current/ voltage; reactance and impedance; LC oscillations (qualitative treatment only), LCR series circuit, resonance; power in AC circuits, wattles current. AC generator and transformer.

Electromagnetic Waves

  • Need for displacement current.
  • Electromagnetic waves and their characteristics (qualitative ideas only). Transverse nature of electromagnetic waves.
  • Electromagnetic spectrum (radio waves, microwaves, infrared, visible, ultraviolet, x-rays, gamma rays) including elementary facts about their uses.

Optics

  • Reflection of light, spherical mirrors, mirror formula. Refraction of light, total internal reflection and its applications optical fibres, refraction at spherical surfaces, lenses, thin lens formula, lens-maker's formula. Magnification, power of a lens, combination of thin lenses in contact combination of a lens and a mirror. Refraction and dispersion of light through a prism.
  • Scattering of light- blue colour of the sky and reddish appearance of the sun at sunrise and sunset.
  • Optical instruments: Human eye, image formation and accommodation, correction of eye defects (myopia and hypermetropia) using lenses.
  • Microscopes and astronomical telescopes (reflecting and refracting) and their magnifying powers.
  • Wave optics: Wavefront and Huygens' principle, reflection and refraction of plane wave at a plane surface using wavefronts.
  • Proof of laws of reflection and refraction using Huygens' principle. Interference, Young's double hole experiment and expression for fringe width, coherent sources and sustained interference of light.
  • Diffraction due to a single slit, width of central maximum.
  • Resolving power of microscopes and astronomical telescopes. Polarisation, plane polarized light; Brewster's law, uses of plane polarized light and Polaroids.

Dual Nature of Matter and Radiation

  • Photoelectric effect, Hertz and Lenard's observations; Einstein's photoelectric equation- particle nature of light.
  • Matter waves- wave nature of particles, de Broglie relation. Davisson-Germer experiment (experimental details should be omitted; only conclusion should be explained).

Atoms and Nuclei

  • Alpha- particle scattering experiments; Rutherford's model of atom; Bohr model, energy levels, hydrogen spectrum. Composition and size of nucleus, atomic masses, isotopes, isobars; isotones.
  • Radioactivity- alpha, beta and gamma particles/ rays and their properties decay law. Mass-energy relation, mass defect; binding energy per nucleon and its variation with mass number, nuclear fission and fusion.

Electronic Devices

  • Energy bands in solids (qualitative ideas only), conductors, insulators and semiconductors; semiconductor diode- I-V characteristics in forward and reverse bias, diode as a rectifier; I-V characteristics of LED, photodiode, solar cell, and Zener diode; Zener diode as a voltage regulator. Junction transistor, transistor action, characteristics of a transistor; transistor as an amplifier (common emitter configuration) and oscillator. Logic gates (OR, AND, NOT, NAND and NOR). Transistor as a switch.

 

KAIET Syllabus of Chemistry

Some Basic Concepts of Chemistry

  • General Introduction: Important and scope of chemistry.
  • Laws of chemical combination, Dalton's atomic theory: concept of elements, atoms and molecules.
  • Atomic and molecular masses. Mole concept and molar mass; percentage composition and empirical and molecular formula; chemical reactions, stoichiometry and calculations based on stoichiometry.

Structure of Atom

  • Atomic number, isotopes and isobars. Concept of shells and subshells, dual nature of matter and light, de Broglie's relationship, Heisenberg uncertainty principle, concept of orbital, quantum numbers, shapes of s,p and d orbitals, rules for filling electrons in orbitals- Aufbau principle, Pauli exclusion principles and Hund's rule, electronic configuration of atoms, stability of half filled and completely filled orbitals.

Classification of Elements and Periodicity in Properties

  • Modern periodic law and long form of periodic table, periodic trends in properties of elements- atomic radii, ionic radii, ionization enthalpy, electron gain enthalpy, electro negativity, valence.

Chemical Bonding and Molecular Structure

  • Valence electrons, ionic bond, covalent bond, bond parameters, Lewis structure, polar character of covalent bond, valence bond theory, resonance, geometry of molecules, VSEPR theory, concept of hybridization involving s, p and d orbital’s and shapes of some simple molecules, molecular orbital theory of homo nuclear diatomic molecules (qualitative idea only). Hydrogen bond.

States of Matter: Gases and Liquids

  • Three states of matter, intermolecular interactions, types of bonding, melting and boiling points, role of gas laws of elucidating the concept of the molecule, Boyle's law, Charle's law, Gay Lussac's law, Avogadro's law, ideal behaviour of gases, empirical derivation of gas equation. Avogadro number, ideal gas equation. Kinetic energy and molecular speeds (elementary idea), deviation from ideal behaviour, liquefaction of gases, critical temperature.
  • Liquid State- Vapour pressure, viscosity and surface tension (qualitative idea only, no mathematical derivations).

Thermodynamics

  • First law of thermodynamics-internal energy and enthalpy, heat capacity and specific heat, measurement of U and H, Hess's law of constant heat summation, enthalpy of : bond dissociation, combustion, formation, atomization, sublimation, phase transition, ionization, solution and dilution.
  • Introduction of entropy as state function, Second law of thermodynamics, Gibbs energy change for spontaneous and nonspontaneous process, criteria for equilibrium and spontaneity. Third law of thermodynamics- Brief introduction.

Equilibrium

  • Equilibrium in physical and chemical processes, dynamic nature of equilibrium, law of chemical equilibrium, equilibrium constant, factors affecting equilibrium-Le Chatelier's principle; ionic equilibrium- ionization of acids and bases, strong and weak electrolytes, degree of ionization, ionization of polybasic acids, acid strength, concept of pH., Hydrolysis of salts (elementary idea)., buffer solutions, Henderson equation, solubility product, common ion effect (with illustrative examples).

Redox Reactions

  • Concept of oxidation and oxidation and reduction, redox reactions oxidation number, balancing redox reactions in terms of loss and gain of electron and change in oxidation numbers.

Hydrogen

  • Occurrence, isotopes, preparation, properties and uses of hydrogen; hydrides-ionic, covalent and interstitial; physical and chemical properties of water, heavy water; hydrogen peroxide-preparation, reactions, uses and structure;

s-Block Elements (Alkali and Alkaline earth metals)

  • Group I and group 2 elements:
  • General introduction, electronic configuration, occurrence, anomalous properties of the first element of each group, diagonal relationship, trends in the variation of properties (such as ionization enthalpy, atomic and ionic radii), trends in chemical reactivity with oxygen, water, hydrogen and halogens; uses.
  • Preparation and Properties of Some important Compounds:
  • Sodium carbonate, sodium chloride, sodium hydroxide and sodium hydrogen carbonate, biological importance of sodium and potassium.
  • Industrial use of lime and limestone, biological importance of Mg and Ca.

Some p-Block Elements

  • General Introduction to p-Block Elements.
  • Group 13 elements: General introduction, electronic configuration, occurrence, variation of properties, oxidation states, trends in chemical reactivity, anomalous properties of first element of the group; Boron, some important compounds: borax, boric acids, boron hydrides. Aluminium: uses, reactions with acids and alkalies.
  • General 14 elements: General introduction, electronic configuration, occurrence, variation of properties, oxidation states, trends in chemical reactivity, anomalous behaviour of first element. Carbon, allotropic forms, physical and chemical properties: uses of some important compounds: oxides.
  • Important compounds of silicon and a few uses: silicon tetrachloride, silicones, silicates and zeolites, their uses.

Organic Chemistry- Some Basic Principles and Techniques

  • General introduction, methods of purification qualitative and quantitative analysis, classification and IUPAC nomenclature of organic compounds.
  • Electronic displacements in a covalent bond: inductive effect, electromeric effect, resonance and hyper conjugation.
  • Homolytic and heterolytic fission of a covalent bond: free radials, carbocations, carbanions; electrophiles and nucleophiles, types of organic reactions.

Hydrocarbons

  • Alkanes- Nomenclature, isomerism, conformations (ethane only), physical properties, chemical reactions including free radical mechanism of halogenation, combustion and pyrolysis.
  • Alkanes-Nomenclature, structure of double bond (ethene), geometrical isomerism, physical properties, methods of preparation: chemical reactions: addition of hydrogen, halogen, water, hydrogen halides (Markovnikov's addition and peroxide effect), ozonolysis, oxidation, mechanism of electrophilic addition.
  • Alkynes-Nomenclature, structure of triple bond (ethyne), physical properties, methods of preparation, chemical reactions: acidic character of alkynes, addition reaction of- hydrogen, halogens, hydrogen halides and water.
  • Aromatic hydrocarbons- Introduction, IUPAC nomenclature; Benzene; resonance, aromaticity; chemical properties: mechanism of electrophilic substitution- Nitration sulphonation, halogenation, Friedel Craft's alkylation and acylation; directive influence of functional group in mono-substituted benzene; carcinogenicity and toxicity.

Environmental Chemistry

  • Environmental pollution : Air, water and soil pollution, chemical reactions in atmosphere, smogs, major atmospheric pollutants; acid rain ozone and its reactions, effects of depletion of ozone layer, greenhouse effect and global warming pollution due to industrial wastes; green chemistry as an alternative tool for reducing Pollution, strategy for control of environmental pollution.

Solid State

  • Classification of solids based on different binding forces; molecular, ionic covalent and metallic solids, amorphous and crystalline solids (elementary idea), unit cell in two dimensional and three dimensional lattices, calculation of density of unit cell, packing in solids, packing efficiency, voids, number of atoms per unit cell in a cubic unit cell, point defects, electrical and magnetic properties, Band theory of metals, conductors, semiconductors and insulators.

Solutions

  •  Types of solutions, expression of concentration of solutions of solids in liquids, solubility of gases in liquids, solid solutions, colligative properties- relative lowering of vapour pressure, Raoult's law, elevation of boiling point, depression of freezing point, osmotic pressure, determination of molecular masses using colligative properties abnormal molecular mass. Van Hoff factor.

Electrochemistry

  • Redox reactions, conductance in electrolytic solutions, specific and molar conductivity variation of conductivity with concentration, kohlrausch's Law, electrolysis and Laws of electrolysis (elementary idea), dry cell- electrolytic cells and Galvanic cells; lead accumulator, EMF of a cell, standard electrode potential, Relation between Gibbs energy change and EMF of a cell, fuel cells; corrosion.

Nuclear Chemistry

  • Introduction, Characteristics of Sub atomic particles, Nuclear Stability, Radio activity, Artifical radioactivity and artifical transmutation, Nuclear reactions, Radio isotops and their Uses.

Chemical Kinetics

  • Rate of a reaction (average and instantaneous), factors affecting rates of reaction; concentration, temperature, catalyst; order and molecularity of a reaction; rate law and specific rate constant, integrated rate equations and half life (only for zero and first order reactions); concept of collision theory ( elementary idea, no mathematical treatment). Activation energy, Arrhenious equation.

Surface Chemistry

  • Adsorption-physisorption and chemisorption; factors affecting adsorption of gases on solids, catalysis homogeneous and heterogeneous, activity and selectivity: enzyme catalysis; colloidal state: distinction between true solutions, colloids and suspensions; lyophillic, lyophobic multimolecular and macromolecular colloids; properties of colloids; Tyndall effect, Brownian movement, electrophoresis, coagulation; emulsions- types of emulsions.

General Principles and Processes of Isolation of Elements

  • Principles and methods of extraction- concentration, oxidation, reduction electrolytic method and refining; occurrence and principles of extraction of aluminium, copper, zinc and iron. UNITVII: p- Block Elements
  • Group 15 elements: General introduction, electronic configuration, occurrence, oxidation states, trends in physical and chemical properties; preparation and properties of ammonia and nitric acid, oxides of nitrogen (structure only); Phosphorous- allotropic forms; compounds of phosphorous: preparation and properties of phosphine, halides (PCI3, PCI5) and oxoacids (elementary idea only).
  • Group 16 elements: General introduction, electronic configuration, oxidation states, occurrence, trends in physical and chemical properties; dioxygen: preparation, properties and uses; classification of oxides; ozone. Sulphur allotropic forms; compounds of sulphur: preparation, preparation, properties and uses of sulphur dioxide; sulphuric acid: industrial process of manufacture, properties and uses, oxoacids of sulphur (structures only).
  • Group 17 elements: General introduction, electronic configuration, oxidation states, occurrence, trends in physical and chemical properties; compounds of halogens: preparation, properties and uses of chlorine and hydrochloric acid, interhalogen compounds oxoacids of halogens (structures only).
  • Group 18 elements: General introduction, electronic configuration, occurrence, trends in physical and chemical properties, uses.d and f Block Elements
  • General introduction, electronic configuration, characteristics of transition metals, general trends in properties of the first row transition metals- metallic character, ionization enthalpy, oxidation states, ionic radii, colour, catalytic property, magnetic properties, interstitial compounds, alloy formation. Preparation and properties of K2Cr2O7 and KMnO4.
  • Lanthanoids- electronic configuration, oxidation states, chemical reactivity, and lanthanoid contraction and its consequences.
  • Actinoids: Electronic configuration, oxidation states and comparison with lanthanoids.

Coordination Compounds

  • Coordination compounds: Introduction, ligands, coordination number, colour, magnetic properties and shapes, IUPAC nomenclature of mononuclear coordination compounds, isomerism (structural and stereo) bonding, Werner's theory VBT,CFT; importance of coordination compounds (in qualitative analysis, biological systems).

Haloalkanes and Haloarenes

  • Haloalkanes: Nomenclature, natureof C X bond, physical and chemicalproperties, mechanismofsubstitution reactions. Optical rotation.
  • Haloarenes: Nature of C-X bond, substitution reactions (directive influence of halogen for mono substituted compounds only).
  • Uses and environment effects of dichloromethane, trichloromethane, tetrachloromethane, iodoform, freons, DDT.
  •  

Alcohols, Phenols and Ethers

  • Alcohols: Nomenclature, methods of preparation, physical andchemical properties (of primary alcohols only); identification of primary, secondary and tertiary alcohols; mechanism of dehydration, uses with special reference to methanoland ethanol.
  • Phenols: Nomenclature, methods of preparation, physical and chemical properties, acidic nature of phenol, electrophillic substitution reactions, uses ofphenols.L Ethers: Nomenclature, methods of preparation, physical and chemical properties uses.

Aldehydes, Ketones and Carboxylic Acids

  • Aldehydes and Ketones: Nomenclature, nature of carbonyl group, methods of preparation, physical and chemical properties; and mechanism of nucleophilic addition, reactivity of alphahydrogen in aldehydes ; uses.
  • Carboxylic Acids: Nomenclature, acidic nature, methods of preparation, physical and chemical properties; uses. Organic Compounds Containing Nitrogen Amines: Nomenclature, classification, structure, methods of preparation, physical and chemical properties, uses, identification of primary secondary and tertiary amines. Cyanides and Isocyanides- will be mentioned at relevant places. Diazonium salts: Preparation, chemical reactions andimportance in synthetic organic chemistry.

Biomolecules

  • Carbohydrates- Classification (aldoses and ketoses), monosaccharide (glucose and fructose), D.L. configuration, oligosaccharides (sucrose, lactose, maltose), polysaccharides (starch, cellulose, glycogen): importance.
  • Proteins- Elementary idea of amino acids, peptide bond, polypeptides, proteins, primary structure, secondary structure, tertiary structure and quaternary structure(qualitative idea only), denaturation of proteins; enzymes.
  • Hormones- Elementary idea(excluding structure).
  • Vitamins- Classification and function.
  • Nucleic Acids: DNA and RNA

Polymers

  • Classification - Natural and synthetic, methods of polymerization (addition and condensation), copolymerization. Some important polymers: natural and synthetic like polyesters, bakelite; rubber,  Biodegradable and non-biodegradable polymers.

Chemistry in Everyday Life

  • Chemicals in medicines-analgesics, tranquilizers, antiseptics, disinfectants, antimicrobials, antifertility drugs, antibiotics, antacids, antihistamines.
  • Chemicals in food-preservatives, artificial sweetening agents, elementary idea of antioxidants.
  • Cleansing agents-soaps and detergents, cleansing action.

KAIET Syllabus of Biology

Diversity in Living World

  • What is living; Biodiversity; Need for classification; Three domains of life; Taxonomy & Systematics; Concept of species and taxonomical hierarchy; Binomial nomenclature; Tools for study of Taxonomy Museums, Zoos, Herbaria, Botanical gardens.
  • Five kingdom classification; salient features and classification of Monera; Protista and Fungi into major groups; Lichens; Viruses and Viroids.
  • Salient features and classification of plants into major groups-Algae, Bryophytes, Pteridophytes, Gymnosperms and Angiosperms (three to five salient and distinguishing features and at least two examples of each category); Angiosperms- classification up to class, characteristic features and examples).
  • Salient features and classification of animals-nonchordate up to phyla level and chordate up to classes level (three to five salient features and at least two examples).  Structural Organisation in Animals and Plants
  • Morphology and modifications; Tissues; Anatomy and functions of different parts of flowering plants: Root, stem, leaf, inflorescence- cymose and recemose, flower, fruit and seed (To be dealt along with the relevant practical of the Practical Syllabus).
  • Animal tissues; Morphology, anatomy and functions of different systems (digestive, circulatory, respiratory, nervous and reproductive) of an insect (cockroach). (Brief account only)

Cell Structure and Function

  • Cell theory and cell as the basic unit of life; Structure of prokaryotic and eukaryotic cell; Plant cell and animal cell; Cell envelope, cell membrane, cell wall; Cell organelles-structure and function; Endo membrane system-endoplasmic reticulum, Golgi bodies, lysosomes, vacuoles; mitochondria, ribosomes, plastids, micro bodies; Cytoskeleton, cilia, flagella, centrioles (ultra structure and function); Nucleus-nuclear membrane, chromatin, nucleolus.
  • Chemical constituents of living cells: Biomolecules-structure and function of proteins, carbodydrates, lipids, nucleic acids; Enzymes-types, properties, enzyme action.
  • B Cell division: Cell cycle, mitosis, meiosis and their significance.

Plant Physiology

  • Transport in plants: Movement of water, gases and nutrients; Cell to cell transport-Diffusion, facilitated diffusion, active transport; Plant water relations Imbibition, water potential, osmosis, plasmolysis; Long distance transport of water -Absorption, apoplast, symplast, transpiration pull, root pressure and guttation; Transpiration-Opening and closing of stomata; Uptake and translocation of mineral nutrients-Transport of food, phloem transport, Mass flow hypothesis; Diffusion of gases (brief mention).
  • Mineral nutrition: Essential minerals, macro and micronutrients and their role; Deficiency symptoms; Mineral toxicity; Elementary idea of Hydroponics as a method to study mineral nutrition; Nitrogen metabolism-Nitrogen cycle, biological nitrogen fixation.
  • Photosynthesis: Photosynthesis as a means of Autotrophic nutrition; Site of photosynthesis take place; pigments involved in Photosynthesis (Elementary idea); Photochemical and biosynthetic phases of photosynthesis; Cyclic and non cyclic and photophosphorylation; Chemiosmotic hypothesis; Photorespiration C3 and C4 pathways; Factors affecting photosynthesis.
  • Respiration: Exchange gases; Cellular respiration-glycolysis, fermentation (anaerobic), TCA cycle and electron transport system (aerobic); Energy relations-Number of ATP molecules generated; Amphibolic pathways; Respiratory quotient.
  • Plant growth and development: Seed germination; Phases of Plant growth and plant growth rate; Conditions  of growth; Differentiation, dedifferentiation and redifferentiation; Sequence of developmental process in a plant cell; Growth regulatorsauxin,gibberellin, cytokinin, ethylene, ABA; Seed dormancy; Vernalisation; Photoperiodism.

Human Physiology

  • Digestion and absorption; Alimentary canal and digestive glands; Role of digestive enzymes and  gastrointestinal hormones; Peristalsis, digestion, absorption and assimilation of proteins, carbohydrates and fats; Caloric value of proteins, carbohydrates and fats; Egestion; Nutritional and digestive disorders PEM, indigestion, constipation, vomiting, jaundice, diarrhea.
  • Breathing and Respiration: Respiratory organs in animals (recall only); Respiratory system in humans;  Mechanism of breathing and its regulation in humans-Exchange of gases, transport of gases and regulation of respiration Respiratory volumes; Disorders related to respiration-Asthma, Emphysema, Occupational respiratory disorders. L Body fluids and circulation: Composition of blood, blood groups, coagulation of blood; Composition of lymph and its function; Human circulatory system-Structure of human heart and blood vessels; Cardiac cycle, cardiac output, ECG, Double circulation; Regulation of cardiac activity; Disorders of circulatory system-Hypertension, Coronary artery disease, Angina pectoris, Heart failure.
  • Excretory products and their elimination: Modes of excretion- Ammonotelism, ureotelism, uricotelism; Human excretory systemstructure and fuction; Urine formation, Osmoregulation; Regulation of kidney function-Renin-angiotensin, Atrial Natriuretic Factor, ADH and Diabetes insipidus; Role of other organs in excretion; Disorders; Uraemia, Renal failure, Renal calculi, Nephritis; Dialysis and artificial kidney.
  • Locomotion and Movement: Types of movement- ciliary, fiagellar, muscular; Skeletal muscle- contractile proteins and muscle contraction; Skeletal system and its functions (To be dealt with the relevant practical of Practical syllabus); Joints; Disorders of muscular and skeletal system-Myasthenia gravis, Tetany, Muscular dystrophy, Arthritis, Osteoporosis, Gout.
  • Neural control and coordination: Neuron and nerves; Nervous system in humans- central nervous system, peripheral nervous system and visceral nervous system; Generation and conduction of nerve impulse; Reflex action; Sense organs; Elementary structure and function of eye and ear.
  • Chemical coordination and regulation: Endocrine glands and hormones; Human endocrine system-Hypothalamus, Pituitary, Pineal, Thyroid, Parathyroid, Adrenal, Pancreas, Gonads; Mechanism of hormone action (Elementary Idea); Role of hormones as messengers and regulators, Hypo-and hyperactivity and related disorders (Common disorders e.g. Dwarfism, Acromegaly, Cretinism, goiter, exopthalmic goiter, diabetes, Addison's disease). (Imp: Diseases and disorders mentioned above to be dealt in brief.)

Reproduction

  • Reproduction in organisms: Reproduction, a characteristic feature of all organisms for continuation of species; Modes of reproduction Asexual and sexual; Asexual reproduction; Modes-Binary fission, sporulation, budding, gemmule, fragmentation; vegetative propagation in plants.
  • Sexual reproduction in flowering plants: Flower structure; Development of male and female gametophytes; Pollination-types, gencies and examples; Out breeding devices; Pollen-Pistil interaction; Double fertilization; Post fertilization events Development of endosperm and embryo, Development of seed and formation of fruit; Special modes-apomixis, part henocarpy, polyembryony; Significance of seed and fruit formation.
  • Human Reproduction: Male and female reproductive systems; Microscopic anatomy of testis and ovary; Gametogenesisspermatogenesis & oogenesis; Menstrual cycle; Fertilisation, embryo development upto blastocyst formation, implantation; Pregnancy and placenta formation (Elementary idea); Parturition (Elementary idea); Lactation (Elementary idea).
  • Reproductive health: Need for reproductive health and prevention of sexually transmitted diseases (STD); Birth control-Need and Methods, Contraception and Medical Termination of Pregnancy (MTP); Amniocentesis; Infertility and assisted reproductive technologies IVF, ZIFT, GIFT (Elementary idea for general awareness).

Genetics and Evolution

  • Heredity and variation: Mendelian Inheritance; Deviations from Mendelism-Incomplete dominance, Co-dominance, Multiple alleles and Inheritance of blood groups, Pleiotropy; Elementary idea of polygenicinheritance; Chromosome theory of inheritance; Chromosomes and genes; Sex determination-In humans, birds, honey bee; Linkage and crossing over; Sex linked inheritance-Haemophilia, Colour blindness; Mendelian disorders in humans-Thalassemia; Chromosomal disorders in humans; Down's syndrome, Turner's and Klinefelter's syndromes.
  • Molecular basis of Inheritance: Search for genetic material and DNAas genetic material; Structure of DNAand RNA; DNA packaging; DNA replication; Central dogma; Transcription, genetic code, translation; Gene expression and regulation-Lac Operon; Genome and human genome project; DNAfinger printing.
  • Evolution: Origin of life; Biological evolution and evidences for biological evolution from Paleontology, comparative anatomy, embryology and molecular evidence); Darwin's contribution, Modern Synthetic theory of Evolution; Mechanism of evolution-Variation (Mutation and Recombination) and Natural Selection with examples, types of natural selection; Gene flow and genetic drift; Hardy-Weinberg's principle; Adaptive Radiation; Human evolution.

Biology and Human Welfare

  • Health and Disease; Pathogens; parasites causing human diseases (Malaria, Filariasis, Ascariasis. Typhoid, Pneumonia, common cold, amoebiasis, ring worm); Basic concepts of immunology-vaccines; Cancer, HIV and AIDS; Adolescence, drug and alcohol abuse.
  • Improvement in food production; Plant breeding, tissue culture, single cell protein, Biofortification; Apiculture and Animal husbandry.
  • Microbes in human welfare: In household food processing, industrial production, sewage treatment, energy generation and as biocontrol agents and biofertilizers.

Biotechnology and Its Applications

  • Principles and process of Biotechnology: Genetic engineering (Recombinant DNAtechnology).
  • Application of Biotechnology in health and agriculture: Human insulin and vaccine production, gene therapy; Genetically modified organisms-Bt crops; Transgenic Animals; Biosafety issues-Biopiracy and patents.

Ecology and environment

  • Organisms and environment: Habitat and niche; Population and ecological adaptations; Population interactions-mutualism, competition, predation, parasitism; Population attributes-growth, birth rate and death rate, age distribution.
  • Ecosystem: Patterns, components; productivity and decomposition; Energy flow; Pyramids of number, biomass, energy; Nutrient cycling (carbon and phosphorous); Ecological succession; Ecological Services-Carbon fixation, pollination, oxygen release.
  • Biodiversity and its conservation: Concept of Biodiversity; Patterns of Biodiversity; Importance of Biodiversity; Loss of Biodiversity; Biodiversity conservation; Hotspots, endangered organisms, extinction, Red Data Book, biosphere reserves, National parks and sanctuaries. L Environmental issues: Air pollution and its control; Water pollution and its control; Agrochemicals and their effects; Solid waste management; Radioactive waste management; Greenhouse effect and global warning; Ozone depletion; Deforestation; Any three case studies as success stories addressing environmental issues.

 

KAIET Exam Dates 

KAIET is usually conducted in the first week of May of every year.

 

KAIET Exam Fee

Price of Information Brochure and Application Form is Rs.500  and Entrance Test fee is  Rs.1000

 

KAIET Test Centres

Krishna All India Entrance Test 2014 will be held in the following cities:

S.No Name of the Centre Centre Code
01 Karad 11
02 Pune 12
03 Mumbai 13
04 Nagpur 14
05 Delhi 15
06 Chandigarh 16
07 Indore 17
08 Surat 18
09 Ahmedabad 19
10 Hyderabad 20
11 Cochin 21

 

KAIET Exam Contact Details

The Controller of Examinations (CoE)
Krishna Institute of Medical Sciences Deemed University
Karad – 415110
Dist ;Satara, Maharashtra
PH. (02164) 241555/6/7/8, FAX- (02164) 242170
TELEFAX- (02164) 241410
WEB SITE : www.kimsuniversity.in
E-mail : contact@kimsuniversity.in

Krishna All India Entrance Test - KAIET 2015

KAIET 2015 Important Dates

Sale of information brochure and application : 25/3/2013 to 16/5/2013
Forms at Karad,
2. Submission of application forms : On or before 16/5/2013 (5.00 pm)
3. Admit Cards should be downloaded from our website www.kimsuniversity.in
4. Day, Date & Time of Examination : Thursday 23/5/2013
 2.00 to 5.00 pm.
5. Schedule of Examination :
l Entry in Examination Hall : 1.30 p.m. 
l Examination Commences : 2.00 p.m. 
l Examination Conclude : 5.00 p.m.
6. Declaration of Results : 24/6/2013 on Notice
 Board & website

Date of Notification and Sale of Information Brochure and Application

  • Mar, 2015 to May, 2015

Last Date of Submission of Application Form

  • May, 2015 (5.00 pm)

Date of Down Load of Admit Card from www.kimsuniversity.in

  • May, 2015 (2.00 to 5.00 pm.)

Date of Examination

  • May, 2015

Date of Declaration of Results

  • Jun, 2015

Krishna All India Entrance Test  -  KAIET 2014 was held on:

  • 15th May, 2014
Other Medical Entrance Exams
AIIMS - All India Institute of Medical Sciences Entrance Exam

AFMC - Armed Forces Medical College Entrance Exam

AIPMT - All India Pre-Medical / Pre-Dental Entrance Examination

AIPGDET - All India Post Graduate Dental Entrance Test

AIPGMET - All India Post Graduate Medical Entrance Test

AIPVT - All India Pre Veterinary Test

MP DMAT - Madhya Pradesh All India Dental & Medical Admission Test

AIMS - Amrita Institute of Medical Sciences Entrance Exam

AIPGMEE - All India Post Graduate Medical/Dental Entrance Exam

AU AIMEE - Annamalai University - All India Medical Entrance Exam

BVP CET - Bharati Vidyapeeth University Combined Entrance Exam

BHU - BHU Medical Entrance Exam for D.M. / M.Ch. and M.D.S.

BLDE UGET - BLDE University Under Graduate Entrance Test

CET PPMC - Common Entrance Test for Pondicherry Private Medical Colleges

COMEDK PGET - Consortium of Medical Engineering and Dental Colleges of Karnataka Post Graduate Entrance Test

CMC UG AWT - Christian Medical College Ludhiana Entrance Test

DUMET - Delhi University Medical-Dental Entrance Test

DUPGMET - Delhi University Post Graduate Medical Entrance Test

DUSET - Delhi University Super-speciality Entrance Test

Dr. D.Y. Patil Institute All India Common Entrance Test for MBBS and BDS

HP CPMT - Himachal Pradesh Combined Pre Medical Entrance Test

JIPMER - Jawaharlal Institute of Post-graduate Medical Education and Research Entrance Exam

KLE UG AIET - KLE University Under Graduate All India Entrance Test

MGMCRI CET - Mahatma Gandhi Medical College and Research Institute Entrance Exam

MGIMS - Mahatma Gandhi Institute of Medical Science Entrance Exam

MAHER - Meenakshi Academy of Higher Education and Research Entrance Exam

MGPGI PGDEE - Mahatma Gandhi Postgraduate Institute of Dental Sciences Entrance Exam

MGDCH JET - Mahatma Gandhi Dental College and Hospital - Joint Entrance Test

MH PGM PGD CET - Maharashtra Post Graduate Medical, Postgraduate Dental Entrance Exam

MH SSET - Maharashtra Superspeciality Entrance Test

PGIMER - Post Graduate Institute of Medical Education and Research Entrance Exam

PIMS AICET UG - Pravara Institute of Medical Sciences All India Common Entrance Exam

PMET - Punjab Medical Entrance Test

SRM Entrance Exam - SRM Institute of Science and Technology Entrance Exam

UPPGMEE - Uttar Pradesh Post Graduate Medical Entrance Exam

VMU AICEE - Vinayaka Missions University All India Common Entrance Exam

UPCAT - Uttar Pradesh Common Admission Test

UPCMET - Uttar Pradesh Combined Medical Entrance Test

UPMT - Uttaranchal Pre-Medical Test

UP CPMT - Uttar Pradesh Combined Pre Medical Test

MP PMT - Madhya Pradesh Pre-Medical Test

HR PMT - Haryana Pre-Medical Test

Manipal PMT - Manipal Pre Medical Test

RPMT - Rajasthan Pre-Medical Test

BHU PMT - BHU Medical Entrance Exam for M.B.B.S./B.D.S./B.A.M.S./B.Pharm

BHU MD/MS - BHU M.D. / M.S. Entrance Test

BHU B.Sc Nursing & B. Pharm (Ay.) Entrance Test

IMS BHU - BHU Ayurveda Vachaspati [MD (Ay)] / Ayurveda Dhanwantari [MS (Ay)]

NBE FEE - National Board of Examinations Fellowship Entrance Examination

AMUPMDC ASSO-CET - Medical Common Entrance Test - ASSO CET - (Maharashtra)

COMEDK UGET - Consortium of Medical, Engineering and Dental Colleges of Karnataka Entrance Exam

GPAT - Graduate Pharmacy Aptitude Test

IVRI - Indian Veterinary Research Institute Entrance Exam

NEET UG - National Eligibility-cum-Entrance Test for Under Graduates

SRU Medical Entrance Exam - Sri Ramachandra University Medical Entrance Exam for MBBS and BDS

FMGE Screening Test

RD Exam - Registered Dietitian Exam

NEET PG - National Eligibility-cum-Entrance Test for Post Graduates

PGI MD/MS Entrance Exam - PGI Chandigarh MD/MS Entrance Exam

MT CET - Maharashtra Technology Common Entrance Test

JNU CEE - Jawaharlal Nehru University Combined Entrance Exam

PPMET - Punjab Para Medical Entrance Test

JSSU UGET - JSS University Under Graduate Entrance Test

HDC MDS CET - Himachal Dental College Masters in Dental Surgery Combine Entrance Exam

MMU AIET for MD/MS/PG Dip - Maharishi Markandeshwar University All India Entrance Test for MD/MS/PG Diploma

AIIMS PG Entrance Exam - All India Institute of Medical Sciences Post Graduate/ Post Doctoral Entrance Exam

PGIMER Nursing Entrance E - Post Graduate Institute of Medical Education and Research Nursing Entrance Exam

DNB CET - Diplomate of National Board Centralised Entrance Test

DNB PD CET - Diplomate of National Board Post Diploma Centralised Entrance Test

PIMS AICET PG - Pravara Institute of Medical Science AICET PG

BLDE PGET - BLDE Post Graduate Entrance Test

KLE PG AIET - KLE Post Graduate All India Entrance Test

NUPGET - Nitte University Post Graduate Entrance Test

CMC Ludhiana PG Entrance - Christian Medical College, Ludhiana Post Graduate Entrance Exam

AMUPMDC APGM & APGD CET - AMUPMDC APGM & APGD Combined Entrance Test

SRH University PMEE - Swami Rama Himalaya University Pre Medical Entrance Exam

Uttarakhand CMDPGEE - Uttrakhand Combined Medical and Dental Post Graduate Entrance Exam

UPPGMET - Uttar Pradesh Post Graduate Medical Entrance Test

Gujarat AIPGDET - Gujarat All India Post Graduate Dental Entrance Test

Amrita PG Medical Entranc - Amrita Vishwa Vidyapeetham PG Medical Entrance Test

NUUGET - Nitte University Under Graduate Entrance Test

Chettinad PG Entrance - Chettinad Univeristy Post Graduate Medical Entrance Test

CIP PG Entrance Exam - Central Institute of Psychiatry PG Entrance Exam

ASSO PGH CET - Association Post Graduate Homoeopathy Common Entrance Test

CPMEE - Common Pre Medical Entrance Exam

Sumandeep AICET - Sumandeep Vidyapeeth All India Common Entrance Test

GUJCET - Gujarat Common Entrance Test for MBBS/BDS

Rajasthan PC PMT - Rajasthan Private Colleges Pre Medical Test

DMIMS AIPMET - Datta Meghe Institute of Medical Sciences AIPMET

HPTU SLCET for B.Pharmacy - HPTU State Level Common Entrance Test

NIH BHMS Entrance Exam - National Institute of Homoeopathy BHMS Entrance Exam

SSAHE AIPGET - Sri Siddhartha Academy of Higher Education AIPGET

PGMET - Post-Graduate Medical Entrance Test

MMU CET - Maharishi Markandeshwar University Common Entrance Exam

MMU AIET for M.Sc Nursing - MMU All India Entrane Test for M.Sc Nursing

IPU CET Medical - Indraprastha University Common Entrance Test Medical

CEE Kerala PGMEE - CEE Kerala Post Graduate Medical Entrance Exam

Sumandeep Vidyapeeth AIPG - SumanDeep Vidyapeeth All India Post Graduate Entrance Test

  Page Views: 2108 | Updated On: 21-Jul-2014